We offer three versions of the Micro-Blaster. Our most popular is the Micro-Blaster IIx3.
The other models are the Micro-Blaster II and the Micro-Blaster I.
Micro-Blaster IIx3 (3 Head Kit)
The Micro-Blaster IIx3 Kit contains 3 Micro-Blaster II heads and a 3 way manifold/valve assembly
to allow the simultaneous triggering of 1,2 or 3 heads. This assembly comes with a small padlock and
key to lock out the system rendering it unfirable between shots greatly adding to safety. The Micro-Blaster IIx3
will allow users to break much larger masses of rock or concrete than with just the single head models.
Users will need to supply a source of compressed air or CO2 (minimum 75 psi, 7 gallon portable air tank recommended)
to trigger their systems. If working in remote areas a "T" handle bicycle pump
and our 1/2 gal aluminum air tank will allow for a very portable triggering system.
Note that you will need to outfit your air source with a quick coupler (1/4" Industrial Interchange) to
connect to the hose on the MB IIx3 Manifold/Valve to your air source.
We offer a Micro-Blaster II Portable Air Tank. And, for those who already have their own air tank, we offer
an Air Tank Conversion Kit, both of which can be found on our Accessories page.
For more details about how this technology works read the brief paragraphs describing the Single Head Micro-Blaster II below.
The Micro-Blaster II is a safe and economical system for the cracking of rock and masonry.
Based on propellant technology, special blasting licenses are not required. The small size
of the system allows it to be used in almost any location.
Capable of breaking rock or masonry of almost any size by successive blasts,
the Micro-Blaster II does its job with almost no fly-rock, which can be completely
eliminated with the use of light mats.
Pneumatically triggered from a 25 ft. distance, the system can be configured to allow multiple
simultaneous shots using a variety of pressure sources including CO2 and compressed air.
The Micro-Blaster II is available in two versions, a single head kit as well as a triple
head kit for larger projects.
Requiring only a 5/16 inch hole, 10 inches deep, the system allows the use of inexpensive
drilling equipment, often a major capital expense for demolition work.
Designed for many years of trouble-free performance, the kit weights only 10 lbs.
The durable molded case measures 15" x 12" x 6" and contains the Micro-Blaster II,
a bore brush and bulb blower (for cleaning drilled holes), 2 tapered pins
(for wedging apart cracked material), a CO2 bicycle inflator (for pressurizing the system),
and instructions for safe use.
The Micro-Blaster II offers several improvements over the original Micro-Blaster.
- Triggered by 75 psi pressure pulse simplifying drilling strategy, freeing the user from the restraints of the lanyard activation of the original Micro-Blaster. Pressure sources can be either compressed air or CO2 cartridge technology.
- Intrinsic safety: The system cannot fire until remotely pressurized by the operator.
- Simultaneous firing of multiple Micro-Blaster II units which allows much larger masses to be cracked through the use of a manifold/valve assembly connecting multiple units.
- Simplified assembly/disassembly for easier and faster field maintenance.
The MICRO-BLASTER I is a compact and affordable demolition system utilizing a fast burning
proprietary gas producing cartridge to crack rock and masonry.
Operated remotely with a 25-foot pull cord, the MICRO-BLASTER I is safe and easy to use.
Because of its low energy output, this system is usable in almost any environment.
Requiring only a 5/16 inch diameter hole, 9 inches deep, the system can be employed without
the need of expensive large hole drilling systems.
Assembled using hardened tool steel components, the MICRO-BLASTER I provides many years of
trouble-free use and is easily serviced in the field with common hand tools.
Packaged in a durable and compact molded case (13.5 in.W x 10 in.D x 3.5 in. H),
the MICRO-BLASTER Kit comes complete with a Micro-Blaster, hole blower, hex key, bull pins
(for wedging apart cracked rock), release cord assembly and manual.
Micro-Blaster Replacement Parts Available from ezebreak
Accessories, such as drills, bits, power inverters and air tanks can be found on our Accessories page.
- Drill Bits